У меня есть виртуальная машина с Minikube внутри.
Она отлично работает, когда я запускаю ее с помощью команды minikube start --vm-driver=none.
Мой хост разбился, а значит, и виртуальная машина. Я перезагрузил хост, а затем виртуальную машину, и когда я попытался запустить minikube, он потерпел неудачу с большим количеством информации:
[root@ubuntu]$ minikube start --vm-driver=none
Starting local Kubernetes v1.13.2 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Stopping extra container runtimes...
Starting cluster components...
E0710 01:30:34.390608 42763 start.go:376] Error starting cluster: kubeadm init:
sudo /usr/bin/kubeadm init --config /var/lib/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests --ignore-preflight-errors=DirAvailable--data-minikube --ignore-preflight-errors=Port-10250 --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-etcd.yaml --ignore-preflight-errors=Swap --ignore-preflight-errors=CRI
: running command:
sudo /usr/bin/kubeadm init --config /var/lib/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests --ignore-preflight-errors=DirAvailable--data-minikube --ignore-preflight-errors=Port-10250 --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-etcd.yaml --ignore-preflight-errors=Swap --ignore-preflight-errors=CRI
output: [init] Using Kubernetes version: v1.13.2
[preflight] Running pre-flight checks
[WARNING FileExisting-ebtables]: ebtables not found in system path
[WARNING FileExisting-socat]: socat not found in system path
[WARNING Hostname]: hostname "minikube" could not be reached
[WARNING Hostname]: hostname "minikube": lookup minikube on 10.240.0.2:53: server misbehaving
[WARNING Port-10250]: Port 10250 is in use
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/var/lib/minikube/certs/"
[certs] Using existing ca certificate authority
[certs] Using existing apiserver certificate and key on disk
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [minikube localhost] and IPs [10.240.0.23 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [minikube localhost] and IPs [10.240.0.23 127.0.0.1 ::1]
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Using existing up-to-date kubeconfig file: "/etc/kubernetes/admin.conf"
[kubeconfig] Using existing up-to-date kubeconfig file: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Using existing up-to-date kubeconfig file: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Using existing up-to-date kubeconfig file: "/etc/kubernetes/scheduler.conf"
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[kubelet-check] Initial timeout of 40s passed.
Unfortunately, an error has occurred:
timed out waiting for the condition
This error is likely caused by:
- The kubelet is not running
- The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)
If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:
- 'systemctl status kubelet'
- 'journalctl -xeu kubelet'
Additionally, a control plane component may have crashed or exited when started by the container runtime.
To troubleshoot, list all containers using your preferred container runtimes CLI, e.g. docker.
Here is one example how you may list all Kubernetes containers running in docker:
- 'docker ps -a | grep kube | grep -v pause'
Once you have found the failing container, you can inspect its logs with:
- 'docker logs CONTAINERID'
error execution phase wait-control-plane: couldn't initialize a Kubernetes cluster
: running command:
sudo /usr/bin/kubeadm init --config /var/lib/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests --ignore-preflight-errors=DirAvailable--data-minikube --ignore-preflight-errors=Port-10250 --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml --ignore-preflight-errors=FileAvailable--etc-kubernetes-manifests-etcd.yaml --ignore-preflight-errors=Swap --ignore-preflight-errors=CRI
.: exit status 1
================================================================================
An error has occurred. Would you like to opt in to sending anonymized crash
information to minikube to help prevent future errors?
To disable this prompt, run: 'minikube config set WantReportErrorPrompt false'
================================================================================
Please enter your response [Y/n]: Prompt timed out.
Bummer, perhaps next time!
minikube failed :( exiting with error code 1
Когда я запустил minikube status, я получил:
host: Running
kubelet: Running
apiserver: Stopped
kubectl: Correctly Configured: pointing to minikube-vm at 10.240.0.23
Похоже, проблема с сервером API. Сервер kubelet запущен, но есть такие ошибки:
kubelet.go:2266] node "minikube" not found
Я запускаю minikube logs и вижу те же ошибки:
://localhost:8443/api/v1/nodes?fieldSelector=metadata.name%3Dminikube&limit=500&resourceVersion=0: dial tcp 127.0.0.1:8443: connect: connection refused
Jul 10 01:35:52 ubuntu kubelet[43030]: E0710 01:35:52.587064 43030 reflector.go:134] k8s.io/kubernetes/pkg/kubelet/config/apiserver.go:47: Failed to list *v1.Pod: Get https://localhost:8443/api/v1/pods?fieldSelector=spec.nodeName%3Dminikube&limit=500&resourceVersion=0: dial tcp 127.0.0.1:8443: connect: connection refused
Jul 10 01:35:52 ubuntu kubelet[43030]: E0710 01:35:52.590979 43030 kubelet.go:2266] node "minikube" not found
Кажется, что у него проблемы с подключением к 127.0.0.1:8443 и, следовательно, с ошибкой, что "minikube" не найден.
Я видел, что эта проблема уже упоминалась здесь, но я попробовал решение и это не сработало для меня.
Я остановил minikube, удалил его и запустил снова, но возникла та же проблема.
Есть идеи, в чем причина этого?
